org.jooq

Interface ExecuteListener

All Superinterfaces:

EventListener, Serializable

All Known Implementing Classes:

DefaultExecuteListener, LoggerListener, StopWatchListener

public interface ExecuteListener
extends EventListener, Serializable

An event listener for Query, Routine, or ResultSet render, prepare, bind, execute, fetch steps.

ExecuteListener is a base type for loggers, debuggers, profilers, data collectors that can be hooked into a jOOQ DSLContext using the Configuration.executeListenerProviders() property, passing Settings to DSL.using(java.sql.Connection, SQLDialect, Settings). jOOQ will use that configuration at the beginning of a query execution event to instanciate all the provided listeners. In other words, listeners have the same lifetime as a single query execution, and can thus be used to store state between the moment when a query execution starts, and the moment when a query execution finishes. Advanced ExecuteListeners can also provide custom implementations of Connection, PreparedStatement, ResultSet, SQLException or RuntimeException to jOOQ in apropriate methods.

For convenience, consider extending DefaultExecuteListener instead of implementing this interface. This will prevent compilation errors in future versions of jOOQ, when this interface might get new methods.

The following table explains how every type of statement / operation invokes callback methods in the correct order for all registered ExecuteListeners. Find a legend below the table for the various use cases.

Callback method	Use case [1]	Use case [2]	Use case [3]	Use case [4]	Use case [5]	Use case [6]
start(ExecuteContext)	Yes, 1x	Yes, 1x	Yes, 1x	Yes, 1x	Yes, 1x	Yes, 1x
renderStart(ExecuteContext)	Yes, 1x	Yes, 1x	No	Yes, 1x	Yes, Nx (for every query)	Yes, 1x
renderEnd(ExecuteContext)	Yes, 1x	Yes, 1x	No	Yes, 1x	Yes, Nx (for every query)	Yes, 1x
prepareStart(ExecuteContext)	Yes, 1x	Yes, 1x	No	Yes, 1x	Yes, Nx (for every query)	Yes, 1x
prepareEnd(ExecuteContext)	Yes, 1x	Yes, 1x	No	Yes, 1x	Yes, Nx (for every query)	Yes, 1x
bindStart(ExecuteContext)	Yes, 1x	No	No	Yes, Nx (for every value set)	No	Yes, 1x
bindEnd(ExecuteContext)	Yes, 1x	No	No	Yes, Nx (for every value set)	No	Yes, 1
executeStart(ExecuteContext)	Yes, 1x	Yes, 1x	No	Yes, 1x	Yes, 1x	Yes, 1x
executeEnd(ExecuteContext)	Yes, 1x	Yes, 1x	No	Yes, 1x	Yes, 1x	Yes, 1x
fetchStart(ExecuteContext)	Yes, 1x (Nx for ResultQuery.fetchMany()	Yes, 1x (Nx for ResultQuery.fetchMany()	Yes, 1x	No	No	No
resultStart(ExecuteContext)	Yes, 1x (Nx for Cursor.fetch(int)	Yes, 1x (Nx for Cursor.fetch(int)	Yes, 1x	No	No	No
recordStart(ExecuteContext)	Yes, Nx	Yes, Nx	Yes, Nx	No	No	No
recordEnd(ExecuteContext)	Yes, Nx	Yes, Nx	Yes, Nx	No	No	No
resultEnd(ExecuteContext)	Yes, 1x (Nx for Cursor.fetch(int)	Yes, 1x (Nx for Cursor.fetch(int)	Yes, 1x	No	No	No
fetchEnd(ExecuteContext)	Yes, 1x (Nx for ResultQuery.fetchMany()	Yes, 1x (Nx for ResultQuery.fetchMany()	Yes, 1x	No	No	No
end(ExecuteContext)	Yes, 1x	Yes, 1x	Yes, 1x	Yes, 1x	Yes, 1x	Yes, 1x
exception(ExecuteContext)	Maybe, 1x	Maybe, 1x	Maybe, 1x	Maybe, 1x	Maybe, 1x	Maybe, 1x

Legend:

1. Used with ResultQuery of statement type StatementType.PREPARED_STATEMENT
2. Used with ResultQuery of statement type StatementType.STATIC_STATEMENT
3. Used with DSLContext.fetch(ResultSet) or with InsertResultStep.fetch()
4. Used with DSLContext.batch(Query)
5. Used with DSLContext.batch(Query[])
6. Used with a Routine standalone call

If nothing is specified, the default is to use LoggerListener and StopWatchListener as the only event listeners, as configured in Settings.isExecuteLogging()

Author:

Lukas Eder

Method Summary

Methods

Modifier and Type	Method and Description
void	bindEnd(ExecuteContext ctx) Called after binding variables to the PreparedStatement Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	bindStart(ExecuteContext ctx) Called before binding variables to the PreparedStatement Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	end(ExecuteContext ctx) Called at the end of the execution lifecycle.
void	exception(ExecuteContext ctx) Called in the event of an exception at any moment of the execution lifecycle.
void	executeEnd(ExecuteContext ctx) Called after executing a statement Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	executeStart(ExecuteContext ctx) Called before executing a statement Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	fetchEnd(ExecuteContext ctx) Called after fetching data from a ResultSet.
void	fetchStart(ExecuteContext ctx) Called before fetching data from a ResultSet.
void	prepareEnd(ExecuteContext ctx) Called after preparing / creating the SQL statement Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	prepareStart(ExecuteContext ctx) Called before preparing / creating the SQL statement Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	recordEnd(ExecuteContext ctx) Called after fetching a record from a ResultSet Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	recordStart(ExecuteContext ctx) Called before fetching a record from a ResultSet Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	renderEnd(ExecuteContext ctx) Called after rendering SQL from a QueryPart Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	renderStart(ExecuteContext ctx) Called before rendering SQL from a QueryPart Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
void	resultEnd(ExecuteContext ctx) Called after fetching a set of records from a ResultSet Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	resultStart(ExecuteContext ctx) Called before fetching a set of records from a ResultSet Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
void	start(ExecuteContext ctx) Called to initialise an ExecuteListener Available attributes from ExecuteContext: ExecuteContext.connection(): The connection used for execution ExecuteContext.configuration(): The execution configuration ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise Overridable attributes in ExecuteContext: ExecuteContext.connectionProvider(ConnectionProvider): The connection provider used for execution.

Method Detail

start

void start(ExecuteContext ctx)

Called to initialise an ExecuteListener

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise

Overridable attributes in ExecuteContext:

• ExecuteContext.connectionProvider(ConnectionProvider): The connection provider used for execution. This may be particularly interesting if a Query was de-serialised and is thus lacking the underlying connection

renderStart

void renderStart(ExecuteContext ctx)

Called before rendering SQL from a QueryPart

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise

renderEnd

void renderEnd(ExecuteContext ctx)

Called after rendering SQL from a QueryPart

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..

Overridable attributes in ExecuteContext:

• ExecuteContext.sql(String): The rendered SQL statement that is about to be executed. You can modify this statement freely.

prepareStart

void prepareStart(ExecuteContext ctx)

Called before preparing / creating the SQL statement

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..

Overridable attributes in ExecuteContext:

• ExecuteContext.sql(String): The rendered SQL statement that is about to be executed. You can modify this statement freely.

prepareEnd

void prepareEnd(ExecuteContext ctx)

Called after preparing / creating the SQL statement

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine

Overridable attributes in ExecuteContext:

• ExecuteContext.statement(PreparedStatement): The Statement, PreparedStatement, or CallableStatement that is about to be executed. You can modify this statement freely, or wrap ExecuteContext.statement() with your enriched statement wrapper

bindStart

void bindStart(ExecuteContext ctx)

Called before binding variables to the PreparedStatement

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine

Overridable attributes in ExecuteContext:

• ExecuteContext.statement(PreparedStatement): The PreparedStatement, or CallableStatement that is about to be executed. You can modify this statement freely, or wrap ExecuteContext.statement() with your enriched statement wrapper

Note that this method is not called when executing queries of type StatementType.STATIC_STATEMENT

bindEnd

void bindEnd(ExecuteContext ctx)

Called after binding variables to the PreparedStatement

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine

Overridable attributes in ExecuteContext:

• ExecuteContext.statement(PreparedStatement): The Statement, PreparedStatement, or CallableStatement that is about to be executed. You can modify this statement freely, or wrap ExecuteContext.statement() with your enriched statement wrapper

Note that this method is not called when executing queries of type StatementType.STATIC_STATEMENT

executeStart

void executeStart(ExecuteContext ctx)

Called before executing a statement

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine

Overridable attributes in ExecuteContext:

• ExecuteContext.statement(PreparedStatement): The Statement, PreparedStatement, or CallableStatement that is about to be executed. You can modify this statement freely, or wrap ExecuteContext.statement() with your enriched statement wrapper

executeEnd

void executeEnd(ExecuteContext ctx)

Called after executing a statement

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
• ExecuteContext.resultSet(): The ResultSet that is about to be fetched or null, if the Query returns no result set, or if a Routine is being executed.
• ExecuteContext.rows(): The number of affected rows if applicable. In case a ResultSet is fetched, this number is only available at the fetchEnd(ExecuteContext) event.

Overridable attributes in ExecuteContext:

• ExecuteContext.resultSet(ResultSet): The ResultSet that is about to be fetched. You can modify this result set freely, or wrap ExecuteContext.resultSet() with your enriched result set wrapper

fetchStart

void fetchStart(ExecuteContext ctx)

Called before fetching data from a ResultSet.

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
• ExecuteContext.resultSet(): The ResultSet that is about to be fetched.

Overridable attributes in ExecuteContext:

• ExecuteContext.resultSet(ResultSet): The ResultSet that is about to be fetched. You can modify this result set freely, or wrap ExecuteContext.resultSet() with your enriched result set wrapper

In case of multiple ResultSets with ResultQuery.fetchMany(), this is called several times, once per ResultSet

Note that this method is not called when executing queries that do not return a result, or when executing routines.

resultStart

void resultStart(ExecuteContext ctx)

Called before fetching a set of records from a ResultSet

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
• ExecuteContext.resultSet(): The ResultSet that is about to be fetched.
• ExecuteContext.result(): The set of records that are about to be fetched.

Note that this method is not called when executing queries that do not return a result, or when executing routines. This is also not called when fetching single records, with Cursor.fetchOne() for instance.

recordStart

void recordStart(ExecuteContext ctx)

Called before fetching a record from a ResultSet

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
• ExecuteContext.resultSet(): The ResultSet that is about to be fetched.
• ExecuteContext.record(): The Record that is about to be fetched.

Note that this method is not called when executing queries that do not return a result, or when executing routines.

recordEnd

void recordEnd(ExecuteContext ctx)

Called after fetching a record from a ResultSet

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
• ExecuteContext.resultSet(): The ResultSet that is about to be fetched.
• ExecuteContext.record(): The last Record that was fetched.

Note that this method is not called when executing queries that do not return a result, or when executing routines.

resultEnd

void resultEnd(ExecuteContext ctx)

Called after fetching a set of records from a ResultSet

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
• ExecuteContext.resultSet(): The ResultSet that is about to be fetched.
• ExecuteContext.record(): The last Record that was fetched.
• ExecuteContext.result(): The set of records that were fetched.

Note that this method is not called when executing queries that do not return a result, or when executing routines. This is also not called when fetching single records, with Cursor.fetchOne() for instance.

fetchEnd

void fetchEnd(ExecuteContext ctx)

Called after fetching data from a ResultSet.

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
  Note that the Statement is already closed!
• ExecuteContext.resultSet(): The ResultSet that was fetched. Note that the ResultSet is already closed!
• ExecuteContext.rows(): The number of affected rows if applicable.
• ExecuteContext.record(): The last Record that was fetched.
• ExecuteContext.result(): The last set of records that were fetched.

In case of multiple ResultSets with ResultQuery.fetchMany(), this is called several times, once per ResultSet

Note that this method is not called when executing queries that do not return a result, or when executing routines.

end

void end(ExecuteContext ctx)

Called at the end of the execution lifecycle.

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
  Note that the Statement is already closed!
• ExecuteContext.resultSet(): The ResultSet that was fetched or null, if no result set was fetched. Note that the ResultSet may already be closed!
• ExecuteContext.rows(): The number of affected rows if applicable.
• ExecuteContext.record(): The last Record that was fetched or null if no records were fetched.
• ExecuteContext.result(): The last set of records that were fetched or null if no records were fetched.

exception

void exception(ExecuteContext ctx)

Called in the event of an exception at any moment of the execution lifecycle.

Available attributes from ExecuteContext:

• ExecuteContext.connection(): The connection used for execution
• ExecuteContext.configuration(): The execution configuration
• ExecuteContext.query(): The Query object, if a jOOQ query is being executed or null otherwise
• ExecuteContext.routine(): The Routine object, if a jOOQ routine is being executed or null otherwise
• ExecuteContext.sql(): The rendered SQL statement that is about to be executed, or null if the SQL statement is unknown..
• ExecuteContext.statement(): The PreparedStatement that is about to be executed, or null if no statement is known to jOOQ. This can be any of the following:
  
  
  • A java.sql.PreparedStatement from your JDBC driver when a jOOQ Query is being executed as StatementType.PREPARED_STATEMENT
  • A java.sql.Statement from your JDBC driver wrapped in a java.sql.PreparedStatement when your jOOQ Query is being executed as StatementType.STATIC_STATEMENT
  • A java.sql.CallableStatement when you are executing a jOOQ Routine
  Note that the Statement may be closed!
• ExecuteContext.resultSet(): The ResultSet that was fetched or null, if no result set was fetched. Note that the ResultSet may already be closed!
• ExecuteContext.rows(): The number of affected rows if applicable.
• ExecuteContext.record(): The last Record that was fetched or null if no records were fetched.
• ExecuteContext.result(): The last set of records that were fetched or null if no records were fetched.
• ExecuteContext.exception(): The RuntimeException that is about to be thrown
• ExecuteContext.sqlException(): The SQLException that was thrown by the database